From pasdebill at hotmail.com  Tue Apr  1 04:44:21 2003
From: pasdebill at hotmail.com (bill root)
Date: Tue, 1 Apr 2003 04:44:21 +0200
Subject: [Mplayer-dvb] Divx & via chipset : pci speed problem ?
In-Reply-To: <3E8864A8.10709@web.de>
Message-ID: <000001c2f7f8$9939fe60$1e00a8c0@toshiba>

Hi

(Thanks for the installation tip)


I have the same problem for a long time now, and i want to tell if
someone have found 1 solution

If i play 1 divx throught the dvb card, i have to add lavc=9000 to run
smoothly

If i don't put lavc=, the cpu are used at 100-120% and the video look
like a 15fps one :p

I have 1 athlon 1800+, 512 ram, asus A7V133

Thanks



From juri at koschikode.com  Tue Apr  1 08:31:14 2003
From: juri at koschikode.com (Juri Haberland)
Date: Tue, 01 Apr 2003 08:31:14 +0200
Subject: [Mplayer-dvb] Divx & via chipset : pci speed problem ?
In-Reply-To: <000001c2f7f8$9939fe60$1e00a8c0@toshiba>
References: <000001c2f7f8$9939fe60$1e00a8c0@toshiba>
Message-ID: <3E893232.7050501@koschikode.com>

bill root wrote:

> I have the same problem for a long time now, and i want to tell if
> someone have found 1 solution
> 
> If i play 1 divx throught the dvb card, i have to add lavc=9000 to run
> smoothly
> 
> If i don't put lavc=, the cpu are used at 100-120% and the video look
> like a 15fps one :p

So you have a solution. Perfect.

> I have 1 athlon 1800+, 512 ram, asus A7V133

What does your CPU load is like if you use lavc=9000?

Cheers,
Juri

PS: please don't use the "reply to" button of your mailer software if
you start a new thread. Thanks.


From st_barszus at gmx.de  Tue Apr  1 12:28:28 2003
From: st_barszus at gmx.de (Steffen Barszus)
Date: Tue, 1 Apr 2003 12:28:28 +0200
Subject: [Mplayer-dvb] Divx & via chipset : pci speed problem ?
In-Reply-To: <000001c2f7f8$9939fe60$1e00a8c0@toshiba>
References: <000001c2f7f8$9939fe60$1e00a8c0@toshiba>
Message-ID: <200304011228.28787.st_barszus@gmx.de>

On Tuesday 01 April 2003 04:44, bill root wrote:
				^^^^^^^

realname would be fine


> I have the same problem for a long time now, and i want to tell if
> someone have found 1 solution
>
> If i play 1 divx throught the dvb card, i have to add lavc=9000 to run
> smoothly
>
> If i don't put lavc=, the cpu are used at 100-120% and the video look
> like a 15fps one :p
>
> I have 1 athlon 1800+, 512 ram, asus A7V133

Whats the question ? If the question is "why?", then it could be two things:

1) dvb-card is not able to handle a bitrate higher then sth around 9000 (9800 
is upper limit of dvd?)

2) you have highres divx and your cpu is to slow to handle it 

-- 
Regards
Steffen
____________________
counter.li.org : #296567.
machine: 181800
vdr-box : 87
____________________
Please dont CC me, since if I have replied I'll watch the tread. Both mails 
will be filtered to the ML-folder. Thanks


From pasdebill at hotmail.com  Tue Apr  1 17:51:35 2003
From: pasdebill at hotmail.com (bill root)
Date: Tue, 1 Apr 2003 17:51:35 +0200
Subject: [Mplayer-dvb] Divx & via chipset : pci speed problem ?
In-Reply-To: <3E893232.7050501@koschikode.com>
Message-ID: <001e01c2f866$92c0b290$1e00a8c0@toshiba>


What does your CPU load is like if you use lavc=9000?

VIDEO:  [DIVX]  512x384  24bpp  25.00 fps  1300.2 kbps (158.7 kbyte/s)
CPU load = ~68-72%

Users with intel chipset have the do the same "tip" ?

+++


From connie.davis at mail.internetseer.com  Sat Apr  5 16:19:50 2003
From: connie.davis at mail.internetseer.com (Connie Davis)
Date: Sat, 5 Apr 2003 09:19:50 -0500 (EST)
Subject: [Mplayer-dvb] Error accessing your website
Message-ID: <5262649.1049552390489.JavaMail.promon@pm68>

On Fri Apr 04, 2003 at 10:01:10 PM EST we were unable to reach your website:
http://mplayerhq.hu/pipermail/mplayer-dvb/2002-October/000714.html
due to the following reason:  Time Out

As of Sat Apr 05, 2003 at 08:51:29 AM EST we were able to access your website again.

We discovered this error during our normal course of website content 
checking for one of our search engine clients. 

If you would like to receive notifications like this in the future if we 
find pages unavailable, click here: 
http://scclick.internetseer.com/sitecheck/clickthrough.jsp?I5s57j5d5f5k5e5h5k53M5pHzKk386uAVz5c_TV5sHzS6uAVzQy5bQP53U5pXTxy5p5b5cNNC_JRPMw5dMW5eNLzVzN6tLI5bHzS6uAVz5c_TV5b5f5f5c5f5c6b_TI6vMw5c5f5c5d5m5d5h5dMPNS53T5p5g=e3

Click here to learn more about us:
http://scclick.internetseer.com/sitecheck/clickthrough.jsp?I5s57j5d5f5k5e5h5k53M5pHzKk286uAVz5c_TV5sHzS6uAVzQy5bQP53U5pXTxy5p5b5cNNC_JRPMw5dMW5eNLzVzN6tLI5bHzS6uAVz5c_TV5b5f5f5c5f5c6b_TI6vMw5c5f5c5d5m5d5h5dMPNS53T5p5f=e3

Sincerely,

Connie Davis
InternetSeer.com
http://www.internetseer.com

------------------------------------------------------------------------------
Your email address was found during a prior visit to your website on 
10-26-2002. The error listed above was verified from both of our 
indexing servers in Philadelphia, Pa. and Los Angeles, Ca. This error could 
have been caused by any number of events, including connectivity problems on 
our part and/or connectivity problems in the Internet as we tried to reach 
your site. This error should not be construed as a guaranteed problem on the 
part of your website or hosting company since there are never any guaranteed 
connection routes on the Internet.

If would like to be excluded from any potential future contact, click here:
http://scclick.internetseer.com/sitecheck/cancel.jsp?HzXa7186uAVz5c_TV5sHzS6uAVzQy5bQP.e3


##mplayer-dvb at mplayerhq.hu## SRC=56
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mplayerhq.hu/pipermail/mplayer-dvb/attachments/20030405/fec3e9ee/attachment.htm>

From ndsub at mail.internetseer.com  Sun Apr  6 00:48:55 2003
From: ndsub at mail.internetseer.com (Mike Dever)
Date: Sat, 5 Apr 2003 17:48:55 -0500 (EST)
Subject: [Mplayer-dvb] InternetSeer- Account Set Up
Message-ID: <32312230.1049582935258.JavaMail.root@sunrays>

Dear Subscriber

Your account has been set up. Please keep this email for your records.

Login:		mplayer-dvb at mplayerhq.hu
Password:	620ugn60

If you have not completed the activation process, please do so now by logging 
into your account:
http://www.internetseer.com/ep/my_internetseer.jsp?7g7j5YM4agX6v76OwTKTTKzD7671ExzT=e3

We look forward to providing you with our valuable monitoring service.

Best Regards,

Michael Dever
CEO/Co-Founder
InternetSeer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mplayerhq.hu/pipermail/mplayer-dvb/attachments/20030405/77c0aa65/attachment.htm>

From crow at linux.org.ba  Sun Apr  6 14:17:55 2003
From: crow at linux.org.ba (Adis Salcin)
Date: Sun, 6 Apr 2003 14:17:55 +0200
Subject: [Mplayer-dvb] Iz it posible to compile mplayer under Win
Message-ID: <1434052457.20030406141755@linux.org.ba>

I wont to know is it posible to compile mplayer in windos...,
my friend wont it but he is newbioe in linux so he ask me that... and
i cant give him answer, so i ask here.. :P
and it is great tool again :P


From joern at raffel.de  Sun Apr  6 14:28:23 2003
From: joern at raffel.de (Joern Raffel)
Date: Sun, 6 Apr 2003 14:28:23 +0200
Subject: [Mplayer-dvb] Iz it posible to compile mplayer under Win
In-Reply-To: <1434052457.20030406141755@linux.org.ba>
References: <1434052457.20030406141755@linux.org.ba>
Message-ID: <20030406122823.GA13473@vm1.vegesack.de>

Hi,

http://mplayerhq.hu/DOCS/faq.html

Q: Where is the Windows version?
    A: It's not released, and won't be. Look around the Windows scene (open source ASF parsers, open source ASF encoders, etc) and you'll know why. We don't want to go to jail. BTW you can compile it yourself, under Cygwin.


Regards, Joern

On Sun, Apr 06, 2003 at 02:17:55PM +0200, Adis Salcin wrote:
> I wont to know is it posible to compile mplayer in windos...,
> my friend wont it but he is newbioe in linux so he ask me that... and
> i cant give him answer, so i ask here.. :P
> and it is great tool again :P
> 
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb


From onnok at web.de  Mon Apr  7 13:25:30 2003
From: onnok at web.de (Onno)
Date: Mon, 07 Apr 2003 12:25:30 +0100
Subject: [Mplayer-dvb] Iz it posible to compile mplayer under Win
References: <1434052457.20030406141755@linux.org.ba>
	<20030406122823.GA13473@vm1.vegesack.de>
Message-ID: <3E91602A.9030701@web.de>

Hi besides RTFM

i doubt that dvb out will/can work under any non linux os, since it uses 
the linux dvb api drivers, so unless they are also ported i guess
it cant work, and since you posted to the mplayer-dvb mailinglist, that
should already be a stopper.....

But if u try and look (@google) u can make everything on windows work,
even without mplayer, but it will crash more often....
(Eg. i use by brothers W2K Server to stream his mpeg2/vob files via lan 
to my linux-vdr box using moonlight streaming server...)

Regards Onno,

P.S.
that said, everything Joern Raffael wrote still applies if you dont
want to use dvb-output!

Joern Raffel schrieb:
> Hi,
> 
> http://mplayerhq.hu/DOCS/faq.html
> 
> Q: Where is the Windows version?
>     A: It's not released, and won't be. Look around the Windows scene (open source ASF parsers, open source ASF encoders, etc) and you'll know why. We don't want to go to jail. BTW you can compile it yourself, under Cygwin.
> 
> 
> Regards, Joern
> 
> On Sun, Apr 06, 2003 at 02:17:55PM +0200, Adis Salcin wrote:
> 
>>I wont to know is it posible to compile mplayer in windos...,
>>my friend wont it but he is newbioe in linux so he ask me that... and
>>i cant give him answer, so i ask here.. :P
>>and it is great tool again :P
>>
>>_______________________________________________
>>Mplayer-dvb mailing list
>>Mplayer-dvb at mplayerhq.hu
>>http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
> 
> 
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb



From jkn at softavenue.fi  Tue Apr 22 09:54:52 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 22 Apr 2003 10:54:52 +0300
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <3E91602A.9030701@web.de>
Message-ID: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>


cd MPlayer-0.90
./configure
make
->
Checking for DVB ... no 
(specify path to DVB/ost/include with --with-extraincdir=DIR)

It seems to want these files from DVB/ost/include:
#include <ost/dmx.h>
#include <ost/frontend.h>
#include <ost/sec.h>
#include <ost/video.h>
#include <ost/audio.h>

I can find sec.h only from siemens_dvb-0.9.4.tar.gz Unfortunately I
found several version of 0.9.4!!  All more or less broken!

Drivers from www.linux-dvb.tv (dvb-20030331.tar.bz2) and CVS update
21.4.03 seem to work.

So my MPlayer has no DVB support. What do I lose?



I wrote a simple script to call dvbstream | mplayer. Is there any
program to do this?

Currently I can only get stream for 3 seconds! Perhaps Hauppauge DVB
card needs extra cooling.  It worked well last week, when temperature
was lower. Does anyone else have this problem?

- Jukka


From nsabbi at libero.it  Tue Apr 22 11:29:57 2003
From: nsabbi at libero.it (Nico)
Date: Tue, 22 Apr 2003 11:29:57 +0200
Subject: [Mplayer-dvb] Mplayer DVB support
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
Message-ID: <3EA50B95.4010204@libero.it>



Jukka Neppius wrote:

>cd MPlayer-0.90
>./configure
>make
>->
>Checking for DVB ... no 
>(specify path to DVB/ost/include with --with-extraincdir=DIR)
>
>It seems to want these files from DVB/ost/include:
>#include <ost/dmx.h>
>#include <ost/frontend.h>
>#include <ost/sec.h>
>#include <ost/video.h>
>#include <ost/audio.h>
>
>I can find sec.h only from siemens_dvb-0.9.4.tar.gz Unfortunately I
>found several version of 0.9.4!!  All more or less broken!
>
>Drivers from www.linux-dvb.tv (dvb-20030331.tar.bz2) and CVS update
>21.4.03 seem to work.
>  
>
they use newstruct drivers.

>So my MPlayer has no DVB support. What do I lose?
>  
>

the chance to stream directly from dvb (no dvbstream intermediation) and 
to change channel while watching.
If you use the newer drivers you should have dvb-head enabled (and DVBIN 
defined to 1 in config.mak), right?

>
>I wrote a simple script to call dvbstream | mplayer. Is there any
>program to do this?
>  
>
Mplayer-cvs.

>Currently I can only get stream for 3 seconds! Perhaps Hauppauge DVB
>card needs extra cooling.  It worked well last week, when temperature
>was lower. Does anyone else have this problem?
>
>- Jukka
>
>_______________________________________________
>Mplayer-dvb mailing list
>Mplayer-dvb at mplayerhq.hu
>http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
>
>  
>



From jkn at softavenue.fi  Fri Apr 25 10:49:59 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 25 Apr 2003 11:49:59 +0300
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <3EA50B95.4010204@libero.it>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it>
Message-ID: <87he8nhsg8.fsf@dialxhki.softavenue.fi>

Nico <nsabbi at libero.it> writes:

> Jukka Neppius wrote:
> 
> >cd MPlayer-0.90
> >./configure
> >make
> >->
> > Checking for DVB ... no (specify path to DVB/ost/include with
> > --with-extraincdir=DIR)
> 
> >
> >It seems to want these files from DVB/ost/include:
> >#include <ost/dmx.h>
> >#include <ost/frontend.h>
> >#include <ost/sec.h>
> >#include <ost/video.h>
> >#include <ost/audio.h>
> >
> >I can find sec.h only from siemens_dvb-0.9.4.tar.gz Unfortunately I
> >found several version of 0.9.4!!  All more or less broken!
> >
> >Drivers from www.linux-dvb.tv (dvb-20030331.tar.bz2) and CVS update
> >21.4.03 seem to work.
> >
> 
> they use newstruct drivers.



> If you use the newer drivers you should have dvb-head enabled (and
> DVBIN defined to 1 in config.mak), right?

cd MPlayer-0.90  # I compiled mplayer here, no cleanup after compilation 

I cannot find those from config.mak

find . -type f |xargs grep -i dvb-head      
nothing
find . -type f |xargs grep -i DVBIN
nothing


I use new drivers, because I couldn't compile or insmod old ones!

I guess I should get a new Mplayer from CVS.  


I have a more serious problem: After few seconds video freezes and
sound stops.  'dvbtune -f 658000000' (without stopping mplayer) gives
seconds or two more video. This is not an Mplayer problem. (Video
stream from dvbstream stops.)  Broken DVB card seems most likely
explanation.  Does anyone else have similar problem?

After testing this several times I have a dvbstream process which
don't die with 'kill -9' and and similar 'rmmod dvb-ttpci'
process. Both use all available cpu time:(


- Jukka


From juri at koschikode.com  Fri Apr 25 11:54:20 2003
From: juri at koschikode.com (Juri Haberland)
Date: Fri, 25 Apr 2003 11:54:20 +0200
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <87he8nhsg8.fsf@dialxhki.softavenue.fi>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it> <87he8nhsg8.fsf@dialxhki.softavenue.fi>
Message-ID: <3EA905CC.70306@koschikode.com>

Jukka Neppius wrote:
> Nico <nsabbi at libero.it> writes:
>> Jukka Neppius wrote:

>> If you use the newer drivers you should have dvb-head enabled (and
>> DVBIN defined to 1 in config.mak), right?
> 
> cd MPlayer-0.90  # I compiled mplayer here, no cleanup after compilation 
> 
> I cannot find those from config.mak
> 
> find . -type f |xargs grep -i dvb-head      
> nothing
> find . -type f |xargs grep -i DVBIN
> nothing

No, look for HAVE_DVB_HEAD in config.h and for DVB_INC in config.mak.

> I use new drivers, because I couldn't compile or insmod old ones!
> 
> I guess I should get a new Mplayer from CVS.  

Won't help. Works here with MPlayer 0.9.0pre3,4,5 and release.

> I have a more serious problem: After few seconds video freezes and
> sound stops.  'dvbtune -f 658000000' (without stopping mplayer) gives
> seconds or two more video. This is not an Mplayer problem. (Video
> stream from dvbstream stops.)  Broken DVB card seems most likely
> explanation.  Does anyone else have similar problem?

I think this is because the driver puts the frontend into powersave
modus if no application is using it. That's when the stream ends. Just
open a second console and issue a 'scan -c' in this. I think there's
also an option that you can give one of the modules to disable the
powersave modus, but I can't recall it at the moment.

Cheers,
Juri


From peter at smtp.latinmail.com  Fri Apr 25 12:44:46 2003
From: peter at smtp.latinmail.com (peter at smtp.latinmail.com)
Date: Fri, 25 Apr 2003 06:44:46 -0400
Subject: [Mplayer-dvb] SOLICITING FOR BUSINESS VENTURE AND PARTNERSHIP.
Message-ID: <20030425104500.3F77B18042@smtp.latinmail.com>

FROM: PETER COLE  TELEPHONE: 0031-630353886 
EMAIL: petercole40 at starmedia.com
     petercole at diplomats.com
ATTN: 

SOLICITING FOR BUSINESS VENTURE AND PARTNERSHIP. 

MY NAME IS PETER COLE CHAIRMAN OF CONTRACT AWARD AND MONITORING COMMITTEE OF THE MINISTRY OF URBAN AND RURAL DEVELOPMENT ,MY DUTY AS EMPOWERED BY THE MAURITIUS GOVERNMENT IS TO PROVIDE THE BASIC AMENITIES,SOCIAL RECRATIONAL ACTIVITIES IN URBAN AND RURAL AREAS,THIS PROGRAMM INCLUDES ASSISTANCE TO DEPRIVED LOCAL COMMUNITIES AND TO CO-ORDINATE PROJECTS AND DEVELOPMENT AT THE NATIONAL LEVEL, FURTHERMORE , FROM THIS PROJECTS WE HAVE BEEN ABLE TO SECURE SOME REASONABLE AMOUNT OF U.S.$21.8(TWENTY ONE MILLION EIGHT HUNDRED THOUSAND U.S.DOLLARS ONLY) AS COMISSION FROM VARIOUS CONTRACTORS RESULTING FROM OVER INVOICING ,HENCE ALL THE NECESSARRY APPROVALS HAS BEEN COMPLETED. 

THESE APPROVED FUND IS NOW PACKAGED AND DESPATCHED THROUGH A SECURITY COMPANY FOR ONWARD DELIVERY TO ITS DESTINATION. THESE FUND ARE FIRST DEPOSITED INTO A VAULT SECURITY BEFORE WE ARRANGE FOR ITS MOVEMENT TO EUROPE THROUGH DIPLOMATIC CHANNEL USING DECOY PURPORTING THAT THE FUND BELONGS TO AN EXPATRIATE/COMPANY, AS WE ARE GOVERNMENT OFFICIALS,WE ARE NOT ALLOWED TO OPERATE FOREIGN BANK ACCOUNT,HENCE WE NEED YOU TO STAND AS THE BENEFICIARY AND CLAIM THE FUND ON OUR BEHALF FROM THE SECURITY COMPANY. 

PRESENTLY I AM NOW IN EUROPE TO SEARCH FOR A RELIABLE PERSON/COMPANY OF HIGH INTERGRITY /DIGNITY AND ONE WITH CONSCIENCE WHO WILL CLAIM THIS FUND ON OUR BEHALF AS THE BENEFICIARY ,AND WE HAVE AGREED TO GIVE YOU 25%OF THE TOTAL SUM AS COMMISSION FOR YOUR ASSISTANCE/EFFORT.AND 5% WILL BE USED TO SETTLE EVERY EXPENSES INCURRED .WE WILL USE 70% TO INVEST UNDER YOUR RECOMMENDATION AND GUIDE AND GO INTO JOINT VENTURE BUSINESS WITH YOU. 

I WOULD GREATLY APPRECIATE YOUR ASSISTANCE .ALSO YOU CALL ME ON MY TELEPHONE NUMBER  FOR MORE BRIEFING  0031-630353886 AS I LOOK FORWARD TO YOUR RESPONSE  AS SOON AS POSSIBLE. 

BEST REGARDS 

PETER COLE 



_______________________________________________________________________________________________________
Obt?n gratis tu cuenta de correo en StarMedia Email. ?Reg?strate hoy mismo!. http://www.starmedia.com/email


From peter at smtp.latinmail.com  Fri Apr 25 12:44:52 2003
From: peter at smtp.latinmail.com (peter at smtp.latinmail.com)
Date: Fri, 25 Apr 2003 06:44:52 -0400
Subject: [Mplayer-dvb] SOLICITING FOR BUSINESS VENTURE AND PARTNERSHIP.
Message-ID: <20030425104506.805E018042@smtp.latinmail.com>

FROM: PETER COLE  TELEPHONE: 0031-630353886 
EMAIL: petercole40 at starmedia.com
     petercole at diplomats.com
ATTN: 

SOLICITING FOR BUSINESS VENTURE AND PARTNERSHIP. 

MY NAME IS PETER COLE CHAIRMAN OF CONTRACT AWARD AND MONITORING COMMITTEE OF THE MINISTRY OF URBAN AND RURAL DEVELOPMENT ,MY DUTY AS EMPOWERED BY THE MAURITIUS GOVERNMENT IS TO PROVIDE THE BASIC AMENITIES,SOCIAL RECRATIONAL ACTIVITIES IN URBAN AND RURAL AREAS,THIS PROGRAMM INCLUDES ASSISTANCE TO DEPRIVED LOCAL COMMUNITIES AND TO CO-ORDINATE PROJECTS AND DEVELOPMENT AT THE NATIONAL LEVEL, FURTHERMORE , FROM THIS PROJECTS WE HAVE BEEN ABLE TO SECURE SOME REASONABLE AMOUNT OF U.S.$21.8(TWENTY ONE MILLION EIGHT HUNDRED THOUSAND U.S.DOLLARS ONLY) AS COMISSION FROM VARIOUS CONTRACTORS RESULTING FROM OVER INVOICING ,HENCE ALL THE NECESSARRY APPROVALS HAS BEEN COMPLETED. 

THESE APPROVED FUND IS NOW PACKAGED AND DESPATCHED THROUGH A SECURITY COMPANY FOR ONWARD DELIVERY TO ITS DESTINATION. THESE FUND ARE FIRST DEPOSITED INTO A VAULT SECURITY BEFORE WE ARRANGE FOR ITS MOVEMENT TO EUROPE THROUGH DIPLOMATIC CHANNEL USING DECOY PURPORTING THAT THE FUND BELONGS TO AN EXPATRIATE/COMPANY, AS WE ARE GOVERNMENT OFFICIALS,WE ARE NOT ALLOWED TO OPERATE FOREIGN BANK ACCOUNT,HENCE WE NEED YOU TO STAND AS THE BENEFICIARY AND CLAIM THE FUND ON OUR BEHALF FROM THE SECURITY COMPANY. 

PRESENTLY I AM NOW IN EUROPE TO SEARCH FOR A RELIABLE PERSON/COMPANY OF HIGH INTERGRITY /DIGNITY AND ONE WITH CONSCIENCE WHO WILL CLAIM THIS FUND ON OUR BEHALF AS THE BENEFICIARY ,AND WE HAVE AGREED TO GIVE YOU 25%OF THE TOTAL SUM AS COMMISSION FOR YOUR ASSISTANCE/EFFORT.AND 5% WILL BE USED TO SETTLE EVERY EXPENSES INCURRED .WE WILL USE 70% TO INVEST UNDER YOUR RECOMMENDATION AND GUIDE AND GO INTO JOINT VENTURE BUSINESS WITH YOU. 

I WOULD GREATLY APPRECIATE YOUR ASSISTANCE .ALSO YOU CALL ME ON MY TELEPHONE NUMBER  FOR MORE BRIEFING  0031-630353886 AS I LOOK FORWARD TO YOUR RESPONSE  AS SOON AS POSSIBLE. 

BEST REGARDS 

PETER COLE 



_______________________________________________________________________________________________________
Obt?n gratis tu cuenta de correo en StarMedia Email. ?Reg?strate hoy mismo!. http://www.starmedia.com/email


From chhey at free.fr  Sat Apr 26 10:03:46 2003
From: chhey at free.fr (Chhum Chhey)
Date: Sat, 26 Apr 2003 10:03:46 +0200
Subject: [Mplayer-dvb] mplayer with dat files vcd
Message-ID: <200304261003.46431.chhey@free.fr>

Hi,

I has exactely  the same trouble, same error. I'm looking for the solution. Do 
you have somes anwers to your problem with mplayer.
I have a mplayer .90 and compile it for myself.

I need help.

Thanks


From jkn at softavenue.fi  Sat Apr 26 10:31:51 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 26 Apr 2003 11:31:51 +0300
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <3EA905CC.70306@koschikode.com>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it> <87he8nhsg8.fsf@dialxhki.softavenue.fi>
	<3EA905CC.70306@koschikode.com>
Message-ID: <87he8lvevc.fsf@dialxhki.softavenue.fi>

Juri Haberland <juri at koschikode.com> writes:

> Jukka Neppius wrote:
> 
> No, look for HAVE_DVB_HEAD in config.h and for DVB_INC in config.mak.

config.h:#define HAVE_DVB_HEAD 1
config.mak:DVB_INC = 

But I try CVS version when I figure out where to get it:(

> I think this is because the driver puts the frontend into powersave
> modus if no application is using it. That's when the stream ends. Just
> open a second console and issue a 'scan -c' in this. I think there's
> also an option that you can give one of the modules to disable the
> powersave modus, but I can't recall it at the moment.

Yes that was it.  I don't boot my computer unless I need to.  I had
notes about which modules to insmod, but I forgot
'dvb_shutdown_timeout=0' from 'insmod dvb-core.o'  Thanks Nico!

Some kind of powersave would be useful though.  Resistor near the
upper edge of the card and small IC beside tuner are hot enough to
burn my finger.

- Jukka


From juri at koschikode.com  Sat Apr 26 13:08:27 2003
From: juri at koschikode.com (Juri Haberland)
Date: Sat, 26 Apr 2003 13:08:27 +0200
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <87he8lvevc.fsf@dialxhki.softavenue.fi>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it> <87he8nhsg8.fsf@dialxhki.softavenue.fi>
	<3EA905CC.70306@koschikode.com> <87he8lvevc.fsf@dialxhki.softavenue.fi>
Message-ID: <3EAA68AB.4060405@koschikode.com>

Jukka Neppius wrote:
> Juri Haberland <juri at koschikode.com> writes:
> 
>> Jukka Neppius wrote:
>> 
>> No, look for HAVE_DVB_HEAD in config.h and for DVB_INC in config.mak.
> 
> config.h:#define HAVE_DVB_HEAD 1
> config.mak:DVB_INC = 

So configure didn't find your DVB include files.
How did you run configure?
Where are your DVB driver sources?
Are they the old ones (0.9 something) or the new ones (from CVS or
1.0pre1/2)?

Let's assume they are in /usr/local/src/DVB.

For the old drivers you need to run:
./configure --with-extraincdir=/usr/local/src/DVB/ost/include

For the new ones you need:
./configure --with-extraincdir=/usr/local/src/DVB/include


> But I try CVS version when I figure out where to get it:(

It won't make a difference.

Cheers,
Juri


From juri at koschikode.com  Sat Apr 26 13:11:01 2003
From: juri at koschikode.com (Juri Haberland)
Date: Sat, 26 Apr 2003 13:11:01 +0200
Subject: [Mplayer-dvb] mplayer with dat files vcd
In-Reply-To: <200304261003.46431.chhey@free.fr>
References: <200304261003.46431.chhey@free.fr>
Message-ID: <3EAA6945.7050108@koschikode.com>

Chhum Chhey wrote:

> I has exactely  the same trouble, same error. I'm looking for the solution. Do 
> you have somes anwers to your problem with mplayer.
> I have a mplayer .90 and compile it for myself.

Uhm, what?

Please be more specific. What are trying to do, what command do you run,
what do you expect this command to do and what does actually happen?

Cheers,
Juri


From jkn at softavenue.fi  Sat Apr 26 13:36:56 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 26 Apr 2003 14:36:56 +0300
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
Message-ID: <87r87ptrqf.fsf@dialxhki.softavenue.fi>

Jukka Neppius <jkn at softavenue.fi> writes:

> cd MPlayer-0.90
> ./configure
> make
> ->
> Checking for DVB ... no 
> (specify path to DVB/ost/include with --with-extraincdir=DIR)
> 
> It seems to want these files from DVB/ost/include:
> #include <ost/dmx.h>
> #include <ost/frontend.h>
> #include <ost/sec.h>
> #include <ost/video.h>
> #include <ost/audio.h>
> 
> I can find sec.h only from siemens_dvb-0.9.4.tar.gz Unfortunately I
> found several version of 0.9.4!!  All more or less broken!

I tried with MPlayer-20030426 (from MPlayer-current.tar.bz2)

Same result!

configure.log:
============ Checking for DVB ============
...
/tmp/mplayer-conf-10682-8839.c:7: ost/dmx.h: No such file or directory
/tmp/mplayer-conf-10682-8839.c:8: ost/frontend.h: No such file or directory
/tmp/mplayer-conf-10682-8839.c:9: ost/sec.h: No such file or directory
/tmp/mplayer-conf-10682-8839.c:10: ost/video.h: No such file or directory
/tmp/mplayer-conf-10682-8839.c:11: ost/audio.h: No such file or directory

Result is: no (specify path to DVB/ost/include with --with-extraincdir=DIR)

===================

All except sec.h are in DVB/include/linux/dvb/
Which come from www.linux-dvb.tv   (21.4.03)

ost/sec.h is #included in libmpdemux/dvb_tune.c, libmpdemux/dvbin.h and
libvo/vo_mpegpes.c


Is MPlayer dvb interface supposed to work only with old 0.9.4 drivers?  

Mplayer works with dvbstream. I have to restart both to change
channel.  After doing this couple days, some kernel resource gets used
up and fork() fails. -> have to reboot.  (Probably a driver fault.)

- Jukka


From nsabbi at libero.it  Sat Apr 26 14:24:34 2003
From: nsabbi at libero.it (Nico)
Date: Sat, 26 Apr 2003 14:24:34 +0200
Subject: [Mplayer-dvb] Mplayer DVB support
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<87r87ptrqf.fsf@dialxhki.softavenue.fi>
Message-ID: <3EAA7A82.7070905@libero.it>



Jukka Neppius wrote:
> Jukka Neppius <jkn at softavenue.fi> writes:
> 
> 
>>cd MPlayer-0.90
>>./configure
>>make
>>->
>>Checking for DVB ... no 
>>(specify path to DVB/ost/include with --with-extraincdir=DIR)
>>
>>It seems to want these files from DVB/ost/include:
>>#include <ost/dmx.h>
>>#include <ost/frontend.h>
>>#include <ost/sec.h>
>>#include <ost/video.h>
>>#include <ost/audio.h>
>>
>>I can find sec.h only from siemens_dvb-0.9.4.tar.gz Unfortunately I
>>found several version of 0.9.4!!  All more or less broken!
> 
> 
> I tried with MPlayer-20030426 (from MPlayer-current.tar.bz2)
> 
> Same result!
> 
> configure.log:
> ============ Checking for DVB ============
> ...
> /tmp/mplayer-conf-10682-8839.c:7: ost/dmx.h: No such file or directory
> /tmp/mplayer-conf-10682-8839.c:8: ost/frontend.h: No such file or directory
> /tmp/mplayer-conf-10682-8839.c:9: ost/sec.h: No such file or directory
> /tmp/mplayer-conf-10682-8839.c:10: ost/video.h: No such file or directory
> /tmp/mplayer-conf-10682-8839.c:11: ost/audio.h: No such file or directory
> 
> Result is: no (specify path to DVB/ost/include with --with-extraincdir=DIR)
> 
> ===================
> 
> All except sec.h are in DVB/include/linux/dvb/
> Which come from www.linux-dvb.tv   (21.4.03)
> 
> ost/sec.h is #included in libmpdemux/dvb_tune.c, libmpdemux/dvbin.h and
> libvo/vo_mpegpes.c
> 
> 

Where did you take 0.9.4? Mine (that is working only with plain kernel 
2.4.18) was taken from linuxtv.org web site.

Yet, weren't you using the newer drivers? I use dvb-kernel from cvs and 
kernel 2.4.20 (but a guy reported that dvb-in is working with 
Metzlerbros' drivers, too) and in this case you should look just below 
"checking DVB" in you configure.log file.

Here is mine:


============ Checking for DVB ============
...
Result is: no (specify path to DVB/ost/include with --with-extraincdir=DIR)
##########################################

============ Checking for DVB HEAD ============

#include <sys/poll.h>
#include <sys/ioctl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>

#include <linux/dvb/dmx.h>
#include <linux/dvb/frontend.h>
#include <linux/dvb/video.h>
#include <linux/dvb/audio.h>
int main(void) {return 0;}

gcc    /tmp/mplayer-conf-752-2837.c -o /tmp/mplayer-conf-1367-2837.o

ldd /tmp/mplayer-conf-1367-2837.o
         libc.so.6 => /lib/i686/libc.so.6 (0x40023000)
         /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)

Result is: yes
##########################################




-in config.mak:

DVBIN = yes
...
DVB_INC =		(empty because I copies the dvb/*.h files in 
/usr/include/linux/dvb)

-in config.h:

#define HAVE_DVB_HEAD 1
#define HAS_DVBIN_SUPPORT 1




> Is MPlayer dvb interface supposed to work only with old 0.9.4 drivers?  

No, with both. It was a hard struggle and a whole week of total breakage.

> 
> Mplayer works with dvbstream. I have to restart both to change
> channel.  After doing this couple days, some kernel resource gets used
> up and fork() fails. -> have to reboot.  (Probably a driver fault.)
> 
> - Jukka

what does dmesg say? This is a driver problem. You should report it to 
mplayer-dvb at linuxtv.org.

Nico



From jkn at softavenue.fi  Sat Apr 26 16:31:35 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 26 Apr 2003 17:31:35 +0300
Subject: [Mplayer-dvb] Mplayer DVB support
In-Reply-To: <3EAA68AB.4060405@koschikode.com>
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it> <87he8nhsg8.fsf@dialxhki.softavenue.fi>
	<3EA905CC.70306@koschikode.com>
	<87he8lvevc.fsf@dialxhki.softavenue.fi>
	<3EAA68AB.4060405@koschikode.com>
Message-ID: <87d6j9tjnc.fsf@dialxhki.softavenue.fi>

Juri Haberland <juri at koschikode.com> writes:

> Jukka Neppius wrote:
> > Juri Haberland <juri at koschikode.com> writes:
> > 
> >> Jukka Neppius wrote:
> >> 
> >> No, look for HAVE_DVB_HEAD in config.h and for DVB_INC in config.mak.
> > 
> > config.h:#define HAVE_DVB_HEAD 1
> > config.mak:DVB_INC = 
> 
> So configure didn't find your DVB include files.
> How did you run configure?
> Where are your DVB driver sources?
> Are they the old ones (0.9 something) or the new ones (from CVS or
> 1.0pre1/2)?
> 
> Let's assume they are in /usr/local/src/DVB.
> 
> For the old drivers you need to run:
> ./configure --with-extraincdir=/usr/local/src/DVB/ost/include
> 
> For the new ones you need:
> ./configure --with-extraincdir=/usr/local/src/DVB/include

I had  '/linux/dvb/' in the end of above:(

Now I have in config.h:
#define HAVE_DVB_HEAD 1
#define HAS_DVBIN_SUPPORT 1

config.mak still has 
DVB_INC = 
But it is in video output section.  My DVB card does not have video out.


============ Checking for DVB ============
...
/tmp/mplayer-conf-9422-12029.c:7: ost/dmx.h: No such file or directory
/tmp/mplayer-conf-9422-12029.c:8: ost/frontend.h: No such file or directory
/tmp/mplayer-conf-9422-12029.c:9: ost/sec.h: No such file or directory
/tmp/mplayer-conf-9422-12029.c:10: ost/video.h: No such file or directory
/tmp/mplayer-conf-9422-12029.c:11: ost/audio.h: No such file or directory
...
Result is: no (specify path to DVB/ost/include with --with-extraincdir=DIR)
=============


If 'DVB' here refers to old driver, then this is OK.  New driver does
not have 'ost/include'


> > But I try CVS version when I figure out where to get it:(
> 
> It won't make a difference.

No it doesn't:(




make:

libmpdemux/dvbin.h:82: warning: #warning No DVB-T country defined 
                                in dvb_defaults.h, defaulting to UK
In file included from cfg-common.h:324,
                 from cfg-mencoder.h:5,
                 from mencoder.c:241:

But I have 
#define FINLAND 1
in libmpdemux/dvb_defaults.h

mencoder.c does not #include dvb_defaults.h

Perhaps this is not serious.  But same repeats several times...

There is also:

In file included from dvbin.c:57:
dvb_defaults.h:41: warning: `DVB_T_LOCATION' redefined
dvbin.h:86: warning: this is the location of the previous definition


Perhaps dvbin.h should include dvb_defaults.h???

I started compiled gmplayer. Right mouse button gives menu, but there
is nothing dvb related.  I might need some config file somewhere.

- Jukka


From nsabbi at libero.it  Sat Apr 26 18:24:59 2003
From: nsabbi at libero.it (Nico)
Date: Sat, 26 Apr 2003 18:24:59 +0200
Subject: [Mplayer-dvb] Mplayer DVB support
References: <87r87vhsqb.fsf_-_@dialxhki.softavenue.fi>
	<3EA50B95.4010204@libero.it> <87he8nhsg8.fsf@dialxhki.softavenue.fi>
	<3EA905CC.70306@koschikode.com>	<87he8lvevc.fsf@dialxhki.softavenue.fi>
	<3EAA68AB.4060405@koschikode.com> <87d6j9tjnc.fsf@dialxhki.softavenue.fi>
Message-ID: <3EAAB2DB.1090307@libero.it>



Jukka Neppius wrote:
> I had  '/linux/dvb/' in the end of above:(
> 
> Now I have in config.h:
> #define HAVE_DVB_HEAD 1
> #define HAS_DVBIN_SUPPORT 1
> 
> config.mak still has 
> DVB_INC = 
> But it is in video output section.  My DVB card does not have video out.
> 
> make:
> 
> libmpdemux/dvbin.h:82: warning: #warning No DVB-T country defined 
>                                 in dvb_defaults.h, defaulting to UK
> In file included from cfg-common.h:324,
>                  from cfg-mencoder.h:5,
>                  from mencoder.c:241:
> 
> But I have 
> #define FINLAND 1
> in libmpdemux/dvb_defaults.h
> 
> mencoder.c does not #include dvb_defaults.h
> 
> Perhaps this is not serious.  But same repeats several times...

no, it includes other files that depend on dvb_defaults.h (a bit 
annoying, though)

> 
> There is also:
> 
> In file included from dvbin.c:57:
> dvb_defaults.h:41: warning: `DVB_T_LOCATION' redefined
> dvbin.h:86: warning: this is the location of the previous definition
> 

 > Perhaps dvbin.h should include dvb_defaults.h???


you are right: in dvbin.h you should add at line 5
#include "dvb_defaults.h"




> 
> I started compiled gmplayer. Right mouse button gives menu, but there
> is nothing dvb related.  I might need some config file somewhere.
> 
> - Jukka
> 


You have dvb-in module compiled in mplayer, now.

Actually there isn't any menu for the channels (I'm working at it now).

You should compile a list of free-to-air channels with the same format 
used by tzap (tzap provides a precompiled list) in

~/.mplayer/channels.conf

then, assuming you have a channel named "MyChannel" in that list  you 
can run
mplayer -dvbin on=1:prog=MyChannel

and change to the next and the previous with 'h' and 'k'.

Does it work?

If it still doesn't go, please run
mplayer  -v -v -dvbin on=1:prog=MyChannel >& err

and post the file err, thanks.

Nico



From nsabbi at libero.it  Mon Apr 28 01:15:20 2003
From: nsabbi at libero.it (Nico)
Date: Mon, 28 Apr 2003 01:15:20 +0200
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
Message-ID: <3EAC6488.7010207@libero.it>



Hi,
actually the dvb-in module is broken because of the changes in the
option parsing code.

This patch for mplayer-cvs is to restore it, clean some code, fix some
bugs, remove some obsolete code and to add (partial) conformance with
the uri syntax both in mplayer and in mencoder:

mplayer dvbin//Pro7
mencoder dvbin://Pro7 -ovc xvid -oac copy -o film.avi -vop denoise3d

There is some issue still to solve, but for the moment the code should
be acceptable.

Thanks,

		Nico

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: mp.diff
URL: <http://lists.mplayerhq.hu/pipermail/mplayer-dvb/attachments/20030428/9db1dcb9/attachment.asc>

From jkn at softavenue.fi  Mon Apr 28 14:42:44 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 28 Apr 2003 15:42:44 +0300
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
In-Reply-To: <3EAC6488.7010207@libero.it>
References: <3EAC6488.7010207@libero.it>
Message-ID: <87vfwypzcr.fsf@dialxhki.softavenue.fi>

Nico <nsabbi at libero.it> writes:

> Hi,
> actually the dvb-in module is broken because of the changes in the
> option parsing code.
> 
> This patch for mplayer-cvs is to restore it, clean some code, fix some
> bugs, remove some obsolete code and to add (partial) conformance with
> the uri syntax both in mplayer and in mencoder:
> 
> mplayer dvbin//Pro7
> mencoder dvbin://Pro7 -ovc xvid -oac copy -o film.avi -vop denoise3d
> 
> There is some issue still to solve, but for the moment the code should
> be acceptable.
> 

Testing as soon as I can.  Perhaps not today...

- Jukka


From jkn at softavenue.fi  Mon Apr 28 23:57:08 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 29 Apr 2003 00:57:08 +0300
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
In-Reply-To: <3EAC6488.7010207@libero.it>
References: <3EAC6488.7010207@libero.it>
Message-ID: <87issyp9or.fsf@dialxhki.softavenue.fi>

Nico <nsabbi at libero.it> writes:

> Hi,
> actually the dvb-in module is broken because of the changes in the
> option parsing code.
> 
> This patch for mplayer-cvs is to restore it, clean some code, fix some
> bugs, remove some obsolete code and to add (partial) conformance with
> the uri syntax both in mplayer and in mencoder:
> 
> mplayer dvbin//Pro7
> mencoder dvbin://Pro7 -ovc xvid -oac copy -o film.avi -vop denoise3d
> 
> There is some issue still to solve, but for the moment the code should
> be acceptable.

I tried and failed:(

I have ~/.mplayer/channels.conf generated by scan (come with kernel
modules).  tzap works.

I started  ./mplayer dvbin://subtv

in dvbin.c:dvb_streaming_start()   dvbin_param_type == "SAT"
it should be "TER" for me. 

Too late (early) to try to guess how to set it. 

Good night!

- Jukka


From nsabbi at libero.it  Tue Apr 29 00:06:39 2003
From: nsabbi at libero.it (Nico)
Date: Tue, 29 Apr 2003 00:06:39 +0200
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
References: <3EAC6488.7010207@libero.it>
	<87issyp9or.fsf@dialxhki.softavenue.fi>
Message-ID: <000901c30dd2$71c62490$152ca8c0@xp>


Ouch!  You can hard-code it in dvbin.c, in function dvb_streaming_start.

It was supposed to be a parameter, but the options parsing code is to  be
remade.

I'm sorry you are having all these problems, but please, don't give up (I
need users' feedback to improve the code) :)

Good night to you, too!

> I tried and failed:(
>
> I have ~/.mplayer/channels.conf generated by scan (come with kernel
> modules).  tzap works.
>
> I started  ./mplayer dvbin://subtv
>
> in dvbin.c:dvb_streaming_start()   dvbin_param_type == "SAT"
> it should be "TER" for me.
>
> Too late (early) to try to guess how to set it.
>
> Good night!
>
> - Jukka
>
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb


From jkn at softavenue.fi  Tue Apr 29 17:06:36 2003
From: jkn at softavenue.fi (Jukka Neppius)
Date: 29 Apr 2003 18:06:36 +0300
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
In-Reply-To: <000901c30dd2$71c62490$152ca8c0@xp>
References: <3EAC6488.7010207@libero.it>
	<87issyp9or.fsf@dialxhki.softavenue.fi>
	<000901c30dd2$71c62490$152ca8c0@xp>
Message-ID: <87bryppclf.fsf@dialxhki.softavenue.fi>

"Nico" <nsabbi at libero.it> writes:

> Ouch!  You can hard-code it in dvbin.c, in function dvb_streaming_start.

Done!

1:
  dvbin.c:dvb_streaming_start 
has
  strncpy(type, "TER", 3);     

So string terminator is not copied.

So in 
  dvbin.c:dvb_channels_list
  if(! strcmp(type, "TER"))
fails and execution continues at 
  else	//SATELLITE


Why not use 
  strcpy(type, "TER");
or 
  strncpy(type, "TER", 4);
?



2:
dvbin.c:dvb_get_channels
 if( fgets(line, 128, f) == NULL ) continue;

128 is not enough for channels.conf generated by scan from
dvb-20030331.tar.bz2.  Longest line I have has 145 B.
So :

#define CHANNEL_LINE_LEN 256
uint8_t line[CHANNEL_LINE_LEN];
if( fgets(line, CHANNEL_LINE_LEN, f) == NULL ) continue;


Now it seems to work!!!!

Not perfect though. It closes video window when changing channels.
Because my channels.conf is autogenerated, it contains streams with no
video.  No video window is opened, so how do I switch to next channel?
For example:

Vastaanotinp?ivitykset:674000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:
FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0

Translation of first words is roughly: "updates for receiver".  I can
only guess what it means.

- I'll add some # to my channels.conf

- Better, but still something wrong.


Perhaps I should remove channel with name "not in use" although pids
seem reasonable:514:670  Doing this automatically is more difficult.





3: I have to command: rm libmpdemux/libmpdemux.a ; make because make
does not know that libmpdemux.a depends on dvbin.o



4: 
make distclean
These didn't go away:

./libmpdemux/realrtsp/asmrp.o
./libmpdemux/realrtsp/real.o
./libmpdemux/realrtsp/rmff.o
./libmpdemux/realrtsp/rtsp.o
./libmpdemux/realrtsp/rtsp_session.o
./libmpdemux/realrtsp/sdpplin.o
./libmpdemux/realrtsp/xbuffer.o


- Jukka


From nsabbi at libero.it  Tue Apr 29 17:58:32 2003
From: nsabbi at libero.it (Nico)
Date: Tue, 29 Apr 2003 17:58:32 +0200
Subject: [Mplayer-dvb] [PATCH]: dvb_in module fixes
Message-ID: <3EAEA128.9020304@libero.it>



Jukka Neppius wrote:

>"Nico"  writes:
>
>  
>
>>Ouch!  You can hard-code it in dvbin.c, in function dvb_streaming_start.
>>    
>>
>
>Done!
>
>1:
>  dvbin.c:dvb_streaming_start 
>has
>  strncpy(type, "TER", 3);     
>
>So string terminator is not copied.
>
>So in 
>  dvbin.c:dvb_channels_list
>  if(! strcmp(type, "TER"))
>fails and execution continues at 
>  else	//SATELLITE
>
>
>Why not use 
>  strcpy(type, "TER");
>or 
>  strncpy(type, "TER", 4);
>?
>
>
>
>2:
>dvbin.c:dvb_get_channels
> if( fgets(line, 128, f) == NULL ) continue;
>
>128 is not enough for channels.conf generated by scan from
>dvb-20030331.tar.bz2.  Longest line I have has 145 B.
>So :
>
>#define CHANNEL_LINE_LEN 256
>uint8_t line[CHANNEL_LINE_LEN];
>if( fgets(line, CHANNEL_LINE_LEN, f) == NULL ) continue;
>
>  
>

OK, I'll update it

>Now it seems to work!!!!
>
>Not perfect though. It closes video window when changing channels.
>Because my channels.conf is autogenerated, it contains streams with no
>video.  No video window is opened, so how do I switch to next channel?
>
h = next channel,   k= previous channel

>For example:
>
>Vastaanotinp?ivitykset:674000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:
>FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0
>
>Translation of first words is roughly: "updates for receiver".  I can
>only guess what it means.
>
>- I'll add some # to my channels.conf
>
>- Better, but still something wrong.
>  
>

The windows must be closed and reopened because  when the next channel 
changes bitrate or resolution the decoder doesn't like it and crashes.
It's possible to have audio only streams, setting vid to 0 and aid to a 
number, but the next line has both to 0, so it seems to be a data only 
channel =>
nothing useful for mplayer. Am I right?

>
>Perhaps I should remove channel with name "not in use" although pids
>seem reasonable:514:670  Doing this automatically is more difficult.
>  
>
Yes, those and the channels that you know to be encrypted, otherwise 
mplayer (at the moment) blocks.
I have to add a check to demux_ts.c to make it discard encrypted streams 
(based on two bits set).

>
>
>
>
>3: I have to command: rm libmpdemux/libmpdemux.a ; make because make
>does not know that libmpdemux.a depends on dvbin.o
>
>  
>
it's a "feature" never fixed in the main Makefile; you can also run
make -C libmpdemux; make

>
>4: 
>make distclean
>These didn't go away:
>
>./libmpdemux/realrtsp/asmrp.o
>./libmpdemux/realrtsp/real.o
>./libmpdemux/realrtsp/rmff.o
>./libmpdemux/realrtsp/rtsp.o
>./libmpdemux/realrtsp/rtsp_session.o
>./libmpdemux/realrtsp/sdpplin.o
>./libmpdemux/realrtsp/xbuffer.o
>
>
>- Jukka
>
>_______________________________________________
>  
>
and also config.mak, config.h, help/*,   */*.a and others.

I reported this problem, but it's still there.

Thanks very much for you help and your patience, tonight I'll apply 
those fixes.

            Nico





From juri at koschikode.com  Wed Apr 30 16:40:33 2003
From: juri at koschikode.com (Juri Haberland)
Date: Wed, 30 Apr 2003 16:40:33 +0200
Subject: [Mplayer-dvb] ANNOUNCE: mplayer.sh version 0.8.2
Message-ID: <3EAFE061.8030001@koschikode.com>

May release.

As usual, get it from http://batleth.sapienti-sat.org/projects/VDR/

Two main things:

- bug fix: doesn't open a X window when using latest mplayer from CVS
- new feature: can play MPEG files directly without scaling; with this
  option you should be able to hires MPEGs even on very slow computers

For the next release I plan to add the DVD title patch from Sven Goethel
that he posted today.

Here the ChangeLog for this release:
# 0.8.2 - changed the way mplayer is called to identify files;
#         should prevent the opening of a X window, that happens
#         on some systems
#       - play mpeg files without any scaling if possible
#       - added config line for AC3 out via DVB card (thanks to
#	  Christian Jacobsen)
#       - added a new config option to choose the video out device;
#         intended for dx3 users
#       - added config options for subtitles (thanks to Martin
#	  ?kerstr?m)
#       - fixed a bug when SLOW_CPU is set to "false" instead of being
#         just commented out
#       - minor code clean-up
#       - cleanup some comments and messages

Have fun!
Juri


